Overview
This guide highlights the differences between versions of FUYL™ Lockers to help identify your product when seeking support.
FUYL™ Tower (MK2) & FUYL™ Tower Pro (MK3)
Our second and third revision FUYL™ Lockers can be identified by their black doors with perspex windows on each bay. These two revisions may look very similar at first glance, but can be differentiated with a few simple checks:
On the Locker
The locker's full serial number can be found riveted to the bottom left of the locker itself.
| FUYL™ Tower (MK2 & 2.5) | FUYL™ Tower Pro (MK3) |
|---|---|
| Serial number does not include "MK3" | Serial number includes "MK3" |
Inside the Bays
| FUYL™ Tower (MK2 & 2.5) | FUYL™ Tower Pro (MK3) |
|---|---|
| Provides USB-A power inside each bay | Provides USB-C PD power inside each bay |
Some second generation FUYL™ Lockers may have been fitted with a newer control door, so it's also important to differentiate between the following components if prompted by our support team. These are considered "MK2.5", though share End Of Life with FUYL™ Tower (MK2) products.
Control Door
| FUYL™ Tower (MK2) | FUYL™ Tower Pro (MK3) |
|---|---|
| Has a no plastic cover over the back of the control door, with a MicroSD card slot | Has a black cover/case over the back of the control door, and no SD Card slot |
Older FUYL™ Lockers (MK1)
The first generation FUYL™ Locker was available in a white finish, with a 2-line simple LCD display on the control door.
If your FUYL™ Locker has individual PIN pads on each bay, it may be a FUYL™ Cell. See here for support with this product.
Other FUYL™ Products
If your FUYL™ product doesn't match any of the descriptions above, please contact support for assistance in identification.