Procedure
- Unplug the FUYL™ Locker from it's power source and allow it to completely dissipate any power (Wait 30s).
- Open the Maintenance Access Panel. Please note that the lock modules are components that can be easily damaged by electrostatic discharge. Ensure the electrostatic discharge warning has been followed and the service person is grounded with an anti-static strap.
- Unplug the specific cable from the two Lock Module connections. Note the cables terminations have a clip at each end.
- Plug the new cable into to two Lock Modules. Ensure that the cable is tucked safely so that it will not chafe when the Maintenance Access Panel closes.
- Ensure all cable routing is neat and secure in the Maintenance Access Panel. Do a mechanical check on the Maintenance Access Panel to ensure it opens and closes easily, locks securely and does not foul or chafe on the cables.